Free continental USA shipping on orders over $100 USD!
Free international shipping on orders over $1,000 USD!
All clubs are custom-built at our facility in Ohio, USA. Please allow 7-10 business days to receive your order.
Choose your perfect set makeup from the options listed.
Our premier line of irons are without a doubt the most advanced set of single-length irons in the golf industry. Our iron lines are not built for any particular handicap, age, or skill level. Capitalize on precision and accurate shot making with the Blackstones. Proper clubface alignment at address is everything when it comes to dropping approach shots on the pin. Alignment being off by only 1º or 2º either way means adding an extra 8 to 15 feet to your birdie putt. The Blackstone's bright white scoring lines against the black PVD background makes club-face alignment exact and automatic at address. Old fashioned club numbering has been replaced by the actual loft angles for precise club selection and distance control. With a set of Blackstones you will find a lot more birdies on the golf course.
Custom Built: Custom built single-length irons fitted based upon your wrist-to-floor measurement (see below for instructions). See chart for corresponding club lengths.
Head covers: All Blackstone Irons come with head covers. Distance clips are included in Blackstone Irons Sets. All woods come with head covers. Purchase iron head covers for the 1 Irons and Pro-Lines here.
Experience: Enjoy greater consistency with a custom built set of single length irons and woods. Being in business for 25 years we have perfected single length play. Ditch convention for common sense.
Steel Shafts: Irons are Steel shafted for the highest level of consistency/accuracy. Blackstone Irons are built with black optimized steel shafts - all other irons and fairway woods are built with a chrome plated optimized steel shaft. The 1 Iron Dark Horse Driver is Shafted with our exclusive One Iron Golf ultra light graphite shaft, for maximum transfer of power plus a stunning increase in control and accuracy.
All human beings share the same skeletal, muscle, tendon, and joint functions and from a mechanical standpoint are the same regardless of height or sex. Non-mechanical differences arise in custom fitting however, for instance: the height of a bicycle seat needs to be greater for a taller person than a shorter person even though the mechanical design of the bicycle remains the same. By the same token, there is only one true fitting variable in the building of golf clubs and that is club length. Based on your wrist-to-floor measurement, we adjust your club length to correspond to our clubheads' lie angle to ensure a proper fitting.
Taking your Wrist-to-Floor Measurement:
The wrist-to-floor measurement should be taken while standing on a hard surface.
Wear jogging/gym shoes (not golf shoes) not in excess of 1.5" sole.
Stand with your back against the wall at strict military attention. Place your shoulders and head against the wall, your feet together, and your arms rigid and straight down at your sides.
Hold a pencil in your right hand (right handed golfer). Back your arms against the wall and then take the pencil and make a mark where your left wrist joint hits the wall. Just the opposite for a left-handed golfer.
Measure from this mark to the floor.
Important: Do not round-up the measurement to the next higher inch increment. For instance, if your measurement is 34 and 7/8″, do not round up to 35″.
One Iron Golf Club Lengths
Do not order based upon what you consider to be your favorite iron (ie: #7 iron), and do not use that corresponding wrist-to-floor measurement when placing your order. When ordering you need to specify your actual wrist-to-floor measurement to ensure a proper fitting. This chart reflects club length based upon our club-head lie angles. Consequently, our fitting process does not apply to any other brand.
For the taller golfer: based upon your wrist-to-floor measurement you may be concerned that your irons would be a typical #3 or #4 iron club length; however, do not compare your measurement to your current #3 or #4 iron. The lie angles of your “long” irons are much flatter than ours which, at your size, requires you to bend over excessively and reach out for the ball at address. The club head lie angle of our irons is 63.5º which is far more upright and allows you, for the first time, to stand upright and much closer to the ball at address resulting in the ideal upright swing posture and swing plane. The taller golfer benefits the most from our fitting formula since they have never played golf clubs that have even come close to fitting them properly. The result being that they have had to develop a very inefficient posture and swing where they are bent over excessively and reaching way out for the ball with every iron in the bag.
How Does the Wrist-to-Floor Measurement Work?
It is based upon trigonometry. At the point of ball impact in the downswing, your wrist, the ground, and the clubhead, form a right triangle. Assuming an ideal swing posture, there is a non-linear mathematical relationship between your wrist-to-floor measurement while standing at attention and your wrist-to-ground distance at ball impact.
The clubhead lie angles are known for the irons and fairway woods as well as the length of one side of the right triangle based upon your mathematically factored wrist-to-ground distance at impact. This gives us the measurement of two angles and the length of one side. We then use trigonometry to solve for the hypotenuse or club length. This is somewhat oversimplified as we factor in shaft deflection and numerous other factors. The fitting formula that we developed produces the ideal golf club length for anyone regardless of height or arm length.
Fully try-out our golf clubs at your home course and at your convenience for a full month. We feel that to truly evaluate a set of golf clubs to determine if they are right for you takes time; and hence, our 30-day return policy (does not include Used/Demo golf clubs, Accessories, or Special Orders). To our knowledge we are the only golf club manufacturer in the entire industry who offers a full money-back return policy on golf clubs after they have been played which should tell you volumes about our commitment to our customers.
If you are not completely satisfied you may return your golf clubs within 30-days of receipt for a full refund of your original purchase price (no hidden fees or re-stocking charges). A return authorization must be obtained before we can accept a return of merchandise. Contact us for this authorization on-line through the Contact page of this website. Shipping/handling charges are not refundable. All contents listed on the original Packing Slip must be included for a full refund. Return shipping charges are the responsibility of the customer. Our return policy is only valid once per customer. Any alterations to the original golf club voids this policy.
If shipping from outside the USA make sure to show that the country of origin is the USA and is a return of USA manufactured goods on the customs form. Also, be sure to make clear that you (the shipper) are responsible for all shipping charges and any brokerage/storage/handling/duties and taxes incurred.We will not accept any return package where a payment is due - the shipment will be returned to you at your cost. Any charges incurred by us will be deducted from your refund.
If you cancel your order prior to it being shipped your refund will be subject to all credit card processing fees assessed which will be deducted from your refund. If you cancel your order after it has shipped you will have to return it to us at your cost. Once we receive the returned order your refund will be subject to all credit card processing fees assessed plus our shipping cost to you which will be deducted from your refund.
We warrant our golf clubs to be free of defects in material and workmanship for a period of one year following the original ship date. We will, without charge to the original purchaser, repair or replace the club if it proves to be defective during normal use within this period (normal use does not include misuse or abuse and the associated damages ie: dents on the top, side, rear, or sole of a wood club-head). This does not cover grip or cosmetic wear and tear due to normal usage. Any alterations to the original golf club voids this warranty.
Picked up a set of black stones awhile ago, was time to add a couple wedges. Really like the black stones, consistent strokes. The company processes orders promptly and they are delivered well packaged.
I have been using taylormade m2 for years. just bought new one-iron 3w. love it because I get much more consistent results (and hit it just as far)! Just like I get much more consistent results with the one-iron set of irons. thank you one iron golf!