Used/Demo golf clubs are those left over from our golf shows and demo day event. They are in excellent condition and an exceptional value at the discounted prices. Available in all sizes, fully covered under our limited warranty, but at the discounted prices are NOT included in our 30-day return policy.
ALL SALES OF USED/DEMO CLUBS ARE FINAL.
Choose your perfect set makeup from the options listed.
Since we custom build all orders, please allow 7-10 business days for your order to ship. For questions, please contact us or visit theIrons page and Woods page for more specification details. Thank you!
Custom Built: Custom built single-length irons fitted based upon your wrist-to-floor measurement. All Blackstone Irons come with head covers. Distance clips are included in Blackstone Irons Sets. Conforms with the Rules of Golf and built in the USA by Master Club Builders.
Shaft: Shafted with our proprietary Black Steel shafts for zero glare and extreme tour performance with shaft flex plane orientation (Spine Align/Puring), and identical shaft flex throughout the set.
Clubhead: Loft angles instead of club numbering for precise distance control with bright white scoring lines for precise clubface alignment at address. State of the art precision face and sole grinding. The deep undercut rear cavity produces a low center of gravity for maximum trajectory and distance with identical swing-weight and moment of inertia (MOI) throughout the set.
Grips: We only install our proprietary 1/8” oversize grips on our golf clubs which are produced exclusively for us by Lamkin.
Finish: Black PVD (Physical Vapor Deposition) finish for zero glare at address. PVD finish produces a harder surface for extra ball compression and greater distance. Bright white scoring lines for precise clubface alignment at address.
Experience: Enjoy greater consistency with a custom built set of single length irons and woods. Being in business for over 25 years we have perfected single length play. Ditch convention for common sense.
Conforms with the Rules of Golf.
Available in Right and Left Hand.
Custom built in the USA by Master Club Builders.
Custom Fitting Single Length Irons
All human beings share the same skeletal, muscle, tendon, and joint functions and from a mechanical standpoint are the same regardless of height or sex. Non-mechanical differences arise in custom fitting however, for instance: the height of a bicycle seat needs to be greater for a taller person than a shorter person even though the mechanical design of the bicycle remains the same. By the same token there is only one true fitting variable in the building of golf clubs and that is club length. Based upon your wrist-to-floor measurement we adjust your club length to correspond to the lie angle of our club-heads in order to ensure a proper fitting.
Taking your Wrist-to-Floor Measurement:
The wrist-to-floor measurement should be taken while standing on a hard surface.
Wear jogging/gym shoes (not golf shoes).
Stand with your back against the wall at strict military attention. Place your shoulders and head against the wall, your feet together, and your arms rigid and straight down at your sides.
Hold a pencil in your right hand (right handed golfer). Back your arms against the wall and then take the pencil and make a mark where your left wrist joint hits the wall. Just the opposite for a left-handed golfer.
Measure from this mark to the floor.
Important: Do not round-up the measurement to the next higher inch increment. For instance, if your measurement is 34 and 7/8″, do not round up to 35″.
One Iron Golf Club Lengths
Do not order based upon what you consider to be your favorite iron (ie: #7 iron), and do not use that corresponding wrist-to-floor measurement when placing your order. When ordering you need to specify your actual wrist-to-floor measurement to ensure a proper fitting. This chart reflects club length based upon our club-head lie angles. Consequently, our fitting process does not apply to any other brand.
For the taller golfer: based upon your wrist-to-floor measurement you may be concerned that your irons would be a typical #3 or #4 iron club length; however, do not compare your measurement to your current #3 or #4 iron. The lie angles of your “long” irons are much flatter than ours which, at your size, requires you to bend over excessively and reach out for the ball at address. The club head lie angle of our irons is 63.5º which is far more upright and allows you, for the first time, to stand upright and much closer to the ball at address resulting in the ideal upright swing posture and swing plane. The taller golfer benefits the most from our fitting formula since they have never played golf clubs that have even come close to fitting them properly. The result being that they have had to develop a very inefficient posture and swing where they are bent over excessively and reaching way out for the ball with every iron in the bag.
How Does the Wrist-to-Floor Measurement Work?
It is based upon trigonometry. At the point of ball impact in the downswing, your wrist, the ground, and the club-head, form a right triangle. Assuming an ideal swing posture, there is a non-linear mathematical relationship between your wrist-to-floor measurement while standing at attention and your wrist-to-ground distance at ball impact.
The club-head lie angles are known for the irons and fairway woods as well as the length of one side of the right triangle based upon your mathematically factored wrist-to-ground distance at impact. This gives us the measurement of two angles and the length of one side. We then use trigonometry to solve for the hypotenuse or club length. This is somewhat oversimplified as we factor in shaft deflection and numerous other factors. The fitting formula that we developed produces the ideal golf club length for anyone regardless of height or arm length.
Fully try-out our golf clubs at your home course and at your convenience for a full month. We feel that to truly evaluate a set of golf clubs to determine if they are right for you takes time; and hence, our 30-day return policy (does not include Used/Demo golf clubs, Accessories, or Special Orders). To our knowledge we are the only golf club manufacturer in the entire industry who offers a full money-back return policy on golf clubs after they have been played which should tell you volumes about our commitment to our customers.
If you are not completely satisfied you may return your golf clubs within 30-days of receipt for a full refund of your original purchase price (no hidden fees or re-stocking charges). A return authorization must be obtained before we can accept a return of merchandise. Contact us for this authorization on-line through the Contact page of this website. Shipping/handling charges are not refundable. All contents listed on the original Packing Slip must be included for a full refund. Return shipping charges are the responsibility of the customer. Our return policy is only valid once per customer. Any alterations to the original golf club voids this policy.
If shipping from outside the USA make sure to show that the country of origin is the USA and is a return of USA manufactured goods on the customs form. Also, be sure to make clear that you (the shipper) are responsible for all shipping charges and any brokerage/storage/handling/duties and taxes incurred.We will not accept any return package where a payment is due - the shipment will be returned to you at your cost. Any charges incurred by us will be deducted from your refund.
You may cancel your order if it has not already shipped, after it leaves our facility it is subject to the Refund Policy (see above). All cancelled orders will be subject to allcredit card processing fees assessed which will be deducted from your refund.
We warrant our golf clubs to be free of defects in material and workmanship for a period of one year following the original ship date. We will, without charge to the original purchaser, repair or replace the club if it proves to be defective during normal use within this period (normal use does not include misuse or abuse and the associated damages ie: dents on the top, side, rear, or sole of a wood club-head). This does not cover grip or cosmetic wear and tear due to normal usage. Any alterations to the original golf club voids this warranty.
Flat out the best Irons I have ever played. I hit them as far as my old Taylormade P790 variable length, just much more consistently. I really enjoy the longer, lighter wedges as well which was something I wasn’t sure I would enjoy. I played the regular line last year and switched to the proline this year, definitely a hot rod option, they feel much more performance oriented for a higher swing speed. Original line would be great for average swingers, I swing quick but am iffy on strike, making a performance single length iron the best option. I can also say I tried Cobras at a local shop and one irons feel much better to me.
ISo Far Great driver. I havent got all the distance I had with my other driver (its close) but I feel more consistent and I'm in the fairway more with less bad shots so thats a big win. Not slicing nearly as much and feel more confident on the tee. Need a little more practice and I think the distance will come. So the driver gets 5* from me. The only thing (non club related) is that the covers for the Driver, 3 Wood, 5 wood are basically useless. They don't stay on the club even if you are able to attach the small velcro pieces together and are a pain to try and put on quickly if at all so I stopped trying. You really need to get covers that come over the shaft as well. Maybe spend a little more on the covers. I will use my covers from my old woods since they will stay on.
I have been playing 1 Iron's single length clubs for about a year.now and am very pleased.with them. Better contact and I have seen no loss in distance, even with the longer irons. My club head speed remains the same as with my old blades, about 110 mph.